24VDC Power Supply

 
 
 
DP-640/DP-660
24V/1.7A Power supply
DP-660 : 24V/1.7A 5V/0.5A Power supply
 
 
 

DP-640 is a 40W,universal input switching mode power supply. It is with 24V output options, which includes triple outputs, dual outputs and single output.		 DP-640

General Specifications:
  • Input voltage : 90VAC to 264VAC
  • Input frequency : 47Hz to 63Hz
  • Inrush current (Cold start) :
      - less than 10A at 115VAC
      - less than 21A at 230VAC
  • DC Outputs : +24V/1.7A
  • Efficiency : higher than 70% at nominal line and rated load
  • Holdup time : >20ms at rated load and 115VAC
  • Over load protection : auto recovery
  • Short circuit protection : auto recovery
  • Over voltage protection : crowbar
  • Operating temperature : 0 to 50°C
  • Cooling : Free air convection
  • Storage temperature : -20 oC to +85 oC
  • Dimension : 44 x 150 x125mm
 
 

DP-660 is a 65 watts, universal input switching mode power supply. It is with 24V/5V output options. DP-660 is intended for power device like motor or solenoid application. Build in +5V 3T-regulator for DP-660 is for if there is a logical control circuit.		 DP-660

General Specifications:
  • Input voltage : 85VAC to 270VAC
  • Input frequency : 47Hz to 63Hz
  • Inrush current (Cold start) :
      - less than 30A at 115VAC
      - less than 60A at 230VAC
  • DC Outputs : +24V/1.7A , +5V/0.5A
  • Efficiency : higher than 70% at rated load and 115VAC
  • Holdup time : 16ms at rated load and 115VAC
  • Over voltage protection : hiccup mode
  • Short circuit protection : latch off
  • Over voltage protection : latch off
  • Operating temperature : 0 to 50°C
  • Cooling : free air convection
  • Storage temperature : -40°C to +85°C
 
 
 
 
Ordering Information
DP-640 24V/1.7A Power Supply
DP-660 24V/1.7A 5V/0.5A Power Supply