|
|
5-Port Industrial rated 10/100 Mbps Ethernet Switch -
DC Powered 10 to 30VDC - DIN-Rail Mount - Wide Temp Range
|
|
|
 |
NS-205 5-Port Industrial 10/100 Mbps Ethernet Switch
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Supports +10 ~ +30V DC voltage
- Low power consumption: 0.052A@24Vdc; +/- 5%,
- Supports operating temperatures from -30 ~ +75 °C
- DIN rail mount for industrial usage
- ESD Protection: 8KV Contact Discharge 15KV Air-Gap Discharge
|
|
View Product Specifications - click HERE |
View 8
Port Switch |
|
|
The NS-205 has 5 Ethernet Switching ports that support 10/100Base-T, with a 10/100M auto-negotiation feature and auto
MDI/MDIX function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100
Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data
rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. A power source for 10-30VDC is required. |
|
|
Features:
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Supports +10 ~ +30V DC voltage
- Supports operating temperatures from 0 ~ +60 degrees
- DIN rail mount for industrial usage
|
|
Specifications:
- Compatibility:IEEE 802.3, IEEE802.3u, IEEE802.3x
- Interface: 10/100 Base-T
- Port: 10/100 Mbps x 5 (Shielded RJ-45 Jack)
- Provides LEDs for network and power monitoring
- ESD Protection: 4KV Contact Discharge, 8KV Air-Gap Discharge
- Cables: 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.), 100 Base-T (Cat.5 UTP cable; 100m Max.)
- Operating temperature: 0 ~ +60 °C
- Storage Temperature: –20 ~ +85 °C
- Relative Humidity: 10% to 90% non-condensing
- Dimensions: 32.6 x 98.2 x 77.2 mm (W x H x D)
- Power requirements: 10 to 30V DC (Removable Terminal Block)
- Low power consumption: 2.0W; Max
|
|
|
|
|